Compatible List can not show up all Car model. Please check the Correct item size of your vechicle. It will work and fit. If you are unsure the item fit or not, please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
2004 Ford F-150, high/low beam. 2015 RAM 1500 with projector-type, high beam. 9005/HB3 (High Beam) + 9006 (Low Beam) + H10(Fog Light).Super Bright LED Light Bulb. 360 Degree Adjustable Beam Angle.
Light source: Flip COB Chips. Input: 3.2A + 0.2A / 3.2A - 0.2A. 30,000 hours service life. 9005/HB3 (High Beam) + 9006 (Low Beam) +.(Fog Light), as long as the halogen bulb size is the same with this, it will fit directly. 9005 (High Beam) + 9006 (Low Beam) + H10. LED lamps are more energy and power than conventional halogen lamps. The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety.
Instantly start without strong current impact, improve battery life by more than 30%. Fast cooling, using the most advanced, heat-dissipating structural design. The power driver adopts a wide voltage constant current mode which has a simple structure, so that the automobile can flexibly cope with various voltage unstable conditions, and has achieved the purpose of less component damage. Compared to HID ballast maintenance, The repair probability is very low which is less than 80%. Low heating temperature, The working temperature of helium can reach 800°-1000°.
LED headlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate! Car LED headlight color temperature are balancing. Xenon bulbs are clear in the same color, about 6000K.
As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process. Put the vehicle into park or make sure it is securely in gear. Be sure to turn off the ignition and remove the key. Be careful to avoid burns, especially when turning on or off the vehicles lighting.Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb. You can track it online. Please make sure it is correct.Q2: My item has not arrived, what's taking so long? A: Sometimes items take longer than expected, especially if it's going far or to rural area. Check with your post office to see if your item has been held up.
If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap. Q4: I bought the wrong items/ the items were not compatible with my vehicle. Q5: How can I find the right LED bulbs for my vehicle? Search for the vehicle year, make, model and the installation position in our store. Let us know which LED bulb you're interested in, so we can check the fitment and get back to you as soon as possible.
Q6: Do I need any warning canceler parts or resistor on my vehicle? 1 Actually, AUIMSOCO LED bulbs can work well on most vehicles and the they won't need any warning canceler parts.2 For some models of Dodge, Ram, Jeep, and Chrysler, they will need an the anti-flicker resistor/ warning canceler to avoid the compatibility issue. Q7: Are AUIMSOCO LED bulbs plug and play? Do I need any modification? 1 For most vehicles, AUIMSOCO LED bulbs could offer a plug and play installation.
2 For factory H1, H3 and HID bulbs, some modifications will be needed, but it's easy to make it work. Q8: Will this bulb fit my vehicle?
A: We can match almost any vehicle to one of our bulb sizes. Q9: Do I need to mention the Year, Make and Model in the notes when place order? Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit! Q10: My bulbs won't fit, help!
A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know. The bulb size may be wrong, double check the item you received with the item you ordered.Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications. Q11: Neither side lighting up? Both sides flicker, flash, or work inconsistantly. A: Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor. Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket. If your light turns on, please proceed to install both bulbs onto your vehicle. If your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle. Note: There is no convention when it comes to polarity.Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different. AUIMSOCO is not liable for any damages caused by installation or usage of our products. To avoid initiating an unpaid item claim, please pay within 7 days. Before leaving feedback/write a review or filing a return case. We will solve the problem! We always put our customers first and your satisfaction is guaranteed. Our AUIMSOCO Tech's are here to serve you. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Lighting & Lamps\Light Bulbs & LEDs". The seller is "lzy-lights-bulbs" and is located in this country: US.
This item can be shipped to United States, Canada, Mexico.